.png)
Understanding and Function of UTP Cable
To understand UTP cable function then we better discuss first about what is the definition of UTP cable or stands Unshielded twisted-pair. UTP cable is a type of cable made of copper conductor, has a plastic insulation and is encased by an insulating material capable of protecting from fire and physical damage.
UTP cable consists of four pairs of interlocking cable cores each of which has different color codes. UTP cable has no protection from electromagnetic interference, but this type of cable is widely used because of the relatively cheap price and its function that is in accordance with the expected standards.
UTP cable function is used as a LAN network cable (Local Area Network) on a computer network system, and usually UTP cable has an impedance of approximately 100 ohm, and is divided into several categories based on its ability as a conductor of data.
In everyday use, UTP cable is very well used as a computer network cable for example in the use of office space or in a company's network system. Regarding some of the weaknesses and shortcomings of UTP cables that are not resistant to electromagnetic fields and damage to hard object collisions, can still be overcome by installing an outer protector such as a plastic pipe.
Definition of LAN Cable
1) LAN is composed of some basic elements that include components
hardware and software. Hardware components include: Personal
Computer (PC), Network Interface Card (NIC) and Cable. While
software components include: Network Operating System, Network
Driver Adapters and Network Protocols.
2) There are three types of cables that are known in general, namely:
· Coaxial cable
· Fiber Optics
· Twisted pair (UTP unshielded twisted pair and STP shielded twisted
pair)
2) Known two types of coaxial cable, ie thick coaxial cable (has
large diameter) and thin coaxial cable (has diameter
smaller).
3) There are 2 types of cable connection for computer network, that is
straight cable and crossover cable where each has
different functions of ynag. Straight cable is used to connect
client to HUB / Router, while crossover cable is used for
connect the client to the client or in a particular case is used
to connect HUB to HUB.
Here's the latest 6 will give you a glimpse of the experience of network cabling when it used to practice in the computer lab ..
hopefully all readers who have forgotten or have doubts how to make it can remember it again .. ..
the following stages or HOW TO MAKE LAN CABLE in straight and cross
First prepare first the necessary tools:
UTP cable does not pass 100 meters long
UTP cable
Jack RJ-45
RJ-45
Crimping Tool / Tang Clamp
crimping tool / clamp tang
If all the above equipment we need is available then we can already start to MAKE LAN CABLE.
cable lan or network cable has 2 types:
1. STRAIGHT LAN CABLE
Straight LAN cable is a cable that has the same way of mounting between the tip of one with the other end. Straight cable is commonly used to connect 2 different types of devices.
How to make :
Peel the outside of the UTP cable about 2cm until the inside cable looks like in the picture above UTP cable.
Separate the cables inside and straighten. Sort and trim based on Orange White, Orange, White Green, Blue, White Blue, Green, Brown White, and Brown. Then cut the ends so that they are flat on each other.
Insert the cables into the Jack RJ-45 pins in the following order:
lan straight sequence
2. LAN CROSS CABLE
LAN Cross cable is a cable that has a way of installation that has a different arrangement between one end with the other end.
A cross cable is commonly used to connect 2 devices of the same type directly. such as connecting the first computer with computer 2 directly without using another intermediary.
How to make :
Do exactly the same with a straight LAN cable for the first tip.
For the other end change the arrangement of cables inside RJ-45 to: White Green, Green, Orange Orange, Blue, White Blue, Orange, White Brown, Chocolate
When finished in the clamp with clamp pliers, the cable is ready for use.
Here is the final image of the ends of the cross cable:
lan cross sequence
Such are the ways and explanations about making lan cables for this article.
hopefully can be useful for all readers.
LAN LAN CABLE OPERATION SYSTEM
Ian cable is an Ethernet transmission medium that connects network devices in your computer network. It is very useful if you know better about the lan cable before you make network design. Good network cable design, is a supporting element that makes your computer network will be easy to maintain and reliable. So the lan cable is very useful once in the reality of the network. The following are the 2 types of lan cables commonly used in LAN networks.
To understand UTP cable function then we better discuss first about what is the definition of UTP cable or stands Unshielded twisted-pair. UTP cable is a type of cable made of copper conductor, has a plastic insulation and is encased by an insulating material capable of protecting from fire and physical damage.
UTP cable consists of four pairs of interlocking cable cores each of which has different color codes. UTP cable has no protection from electromagnetic interference, but this type of cable is widely used because of the relatively cheap price and its function that is in accordance with the expected standards.
UTP cable function is used as a LAN network cable (Local Area Network) on a computer network system, and usually UTP cable has an impedance of approximately 100 ohm, and is divided into several categories based on its ability as a conductor of data.
In everyday use, UTP cable is very well used as a computer network cable for example in the use of office space or in a company's network system. Regarding some of the weaknesses and shortcomings of UTP cables that are not resistant to electromagnetic fields and damage to hard object collisions, can still be overcome by installing an outer protector such as a plastic pipe.
Definition of LAN Cable
1) LAN is composed of some basic elements that include components
hardware and software. Hardware components include: Personal
Computer (PC), Network Interface Card (NIC) and Cable. While
software components include: Network Operating System, Network
Driver Adapters and Network Protocols.
2) There are three types of cables that are known in general, namely:
· Coaxial cable
· Fiber Optics
· Twisted pair (UTP unshielded twisted pair and STP shielded twisted
pair)
2) Known two types of coaxial cable, ie thick coaxial cable (has
large diameter) and thin coaxial cable (has diameter
smaller).
3) There are 2 types of cable connection for computer network, that is
straight cable and crossover cable where each has
different functions of ynag. Straight cable is used to connect
client to HUB / Router, while crossover cable is used for
connect the client to the client or in a particular case is used
to connect HUB to HUB.
Here's the latest 6 will give you a glimpse of the experience of network cabling when it used to practice in the computer lab ..
hopefully all readers who have forgotten or have doubts how to make it can remember it again .. ..
the following stages or HOW TO MAKE LAN CABLE in straight and cross
First prepare first the necessary tools:
UTP cable does not pass 100 meters long
UTP cable
Jack RJ-45
RJ-45
Crimping Tool / Tang Clamp
crimping tool / clamp tang
If all the above equipment we need is available then we can already start to MAKE LAN CABLE.
cable lan or network cable has 2 types:
1. STRAIGHT LAN CABLE
Straight LAN cable is a cable that has the same way of mounting between the tip of one with the other end. Straight cable is commonly used to connect 2 different types of devices.
How to make :
Peel the outside of the UTP cable about 2cm until the inside cable looks like in the picture above UTP cable.
Separate the cables inside and straighten. Sort and trim based on Orange White, Orange, White Green, Blue, White Blue, Green, Brown White, and Brown. Then cut the ends so that they are flat on each other.
Insert the cables into the Jack RJ-45 pins in the following order:
lan straight sequence
2. LAN CROSS CABLE
LAN Cross cable is a cable that has a way of installation that has a different arrangement between one end with the other end.
A cross cable is commonly used to connect 2 devices of the same type directly. such as connecting the first computer with computer 2 directly without using another intermediary.
How to make :
Do exactly the same with a straight LAN cable for the first tip.
For the other end change the arrangement of cables inside RJ-45 to: White Green, Green, Orange Orange, Blue, White Blue, Orange, White Brown, Chocolate
When finished in the clamp with clamp pliers, the cable is ready for use.
Here is the final image of the ends of the cross cable:
lan cross sequence
Such are the ways and explanations about making lan cables for this article.
hopefully can be useful for all readers.
LAN LAN CABLE OPERATION SYSTEM
Ian cable is an Ethernet transmission medium that connects network devices in your computer network. It is very useful if you know better about the lan cable before you make network design. Good network cable design, is a supporting element that makes your computer network will be easy to maintain and reliable. So the lan cable is very useful once in the reality of the network. The following are the 2 types of lan cables commonly used in LAN networks.
Tidak ada komentar:
Posting Komentar